Feeder Clutch (Pl3.1.20) - Xerox Phaser 6180MFP Service Manual

Service Parts Disassembly

Feeder Clutch (PL3.1.20)

8-46
1. Open the Front Cover.
2. Remove the Fuser (page 8-12).
3. Remove the Rear Cover (page 8-18).
4. Remove the Bottom Cover (page 8-19).
5. Remove the Right Pole Inner Cover (page 8-21).
6. Remove the Right Pole Cover (page 8-22).
7. Remove the Right Cover (page 8-23).
8. Remove the Drive Assembly (page 8-78).
9. Disconnect P/J235.
10. Release the Yellow Feeder Clutch wiring harness from the clamp and
hook on the printer frame.
11. Remove the E-ring securing the Feeder Clutch to the Feeder Unit
(PL3.2.1).
12. Remove the Feeder Clutch from the Feeder.
Replacement Note Replacement Note
Be sure to match the color of the Clutch Harness and the color of the
Clutch positioning rib. The Feeder Clutch Harness is Yellow.
Phaser 6180MFP Multifunction Printer Service Manual
P/J235
s6180mfp-270