Target Fax No Answer - Xerox Phaser 6180MFP Service Manual

Error Messages and Codes

Target Fax No Answer

3-220
The Fax has failed. The following troubleshooting procedure applies to these
errors.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Scanner Controller Board, PL9.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the telephone line connection.
Reconnect the telephone line
connector on the Scanner Controller
Board.
2. Does the error still occur when
faxing?
2 1. Check the sending fax side protocol:
on the Configuration page:
>
2. Does the Protocol Monitor meet the
specifications?
3 1. Check the printer setting:
Admin Menu
Country.
2. Is the Country setting correct?
1. Check the Scanner Controller Board
4
for correct installation. Reseat the
Scanner Controller Board
(page 8-99).
2. Does the error still occur when
faxing?
035-718: Target Fax No Answer (Receive T1 Time Out)
System
Information Pages.
System
> Fax Settings >
Phaser 6180MFP Multifunction Printer Service Manual
Wiring and Plug/Jack Map References
Yes
Go to step 2.
Go to step 3.
> Go to step 4.
Replace the
Scanner
Controller Board
(page 8-99).
No
Complete.
Change the
sending fax side
setting.
Set the correct
Country setting.
Complete.