Black Print - Xerox Phaser 6180MFP Service Manual

Black Print

Phaser 6180MFP Multifunction Printer Service Manual
The entire image is black.
Initial Actions
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
Transfer Unit, PL4.1.1
Laser Unit, PL5.1.12
Print Cartridge (C/M/Y/K),
PL5.1.17-20
HVPS, PL5.2.15
Scanner Controller Board, PL9.1.1
Image Processor Board, PL9.1.20
MCU Board, PL9.2.13
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Perform Test Print (Cyan 20%,
Magenta 20%, Yellow 20%, and
Black 20%):
Diag
2. Does the error still occur when
printing?
1. Perform a copy job.
2
2. Does the error still occur when
copying?
3 1. Check the Scanner Controller Board
wiring harness connectors P/J64
and P/J65. Reseat the connectors.
2. Does the error still occur?
Example Print
Service Mode > Printer
> Test Print.
Print-Quality Troubleshooting
Black Print
Yes No
Go to step 5. Go to step 2.
Go to step 3. Complete.
Replace the ADF Complete.
Scanner
Assembly
(page 8-103).
Go to step 4.
5-31