Xerox Phaser 6180MFP Service Manual page 569

Phaser 6180MFP Multifunction Printer Service Manual
Troubleshooting Procedure Table (continued)
Step Actions and Questions
1. Check the Scanner Controller Board
4
wiring harness connectors P/J64
and P/J65. Reseat the wiring
harness connectors.
2. Does the image quality improve?
5 1. Check the spot's regular intervals.
2. Are there any blank spots on the
page?
1. Check the paper condition.
6
2. Is the paper dry, recommended
type, and loaded in the correct
position?
7 1. Check the Print Cartridge (C/M/Y/K)
for damages.
2. Is the Print Cartridge damaged?
1. Check the Transfer Unit.
8
2. Are there any damages on the
Transfer Unit surface?
1. Check the Transfer Unit for correct
9
installation. Reseat the Transfer Unit
(page 8-9).
2. Does the image quality improve?
Print-Quality Troubleshooting
Yes No
Complete. Go to step 5.
Refer to Go to step 6.
"Repeating
Defect
Measurement"
on page 5-24.
Go to step 7. Replace the
paper.
Replace the Go to step 8.
Print Cartridge
(page 8-11).
Replace the Go to step 9.
Transfer Unit
(page 8-9).
Complete. Replace the
Transfer Unit
(page 8-9).
5-43