Flash Error - Xerox Phaser 6180MFP Service Manual

Error Messages and Codes

Flash Error

3-96
Flash error has occurred. The following troubleshooting procedure applies to
these errors.
Applicable Chain Link
Chain Link
Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.20
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the Image Processor Board
for correct installation. Reseat the
Image Processor Board
(page 8-90).
2. Does the error still occur when the
printer is turned On?
016-500: Erase Flash Error (Download Delete Error)
016-501: Write Flash Error (Download Write Error)
016-502: Write Flash Error (Download Verify Error)
Wiring and Plug/Jack Map References
Phaser 6180MFP Multifunction Printer Service Manual
Yes No
Replace the Complete.
Image
Processor Board
(page 8-90).