Printer Options
Additional Memory
Duplex Unit
Phaser 6180MFP Multifunction Printer Service Manual
Phaser 6180MFP Multifunction printer options include:
Additional Memory (256 MB/ 512 MB/ 1GB)
Optional 550-Sheet Feeder (Tray 3)
Duplex Unit
Multi-Protocol Network Card
The printer features one slot that accepts 256 or 512 MB, or 1 GB of DDR2
DIMMs. The standard 384 MB memory is soldered on board. Memory
modules must meet the following characteristics:
200 Pin DDR2 DIMM (8 chip type)
Unbuffered, Non-parity
The printer's Configuration page lists the amount of RAM installed in the
printer.
s6180mfp-134
User can install the Duplex Unit without using any tools by simply removing
the Transfer Unit.
Duplex Unit
s6180mfp-135
General Information
1-11