Engine Model Mismatch - Xerox Phaser 6180MFP Service Manual

Error Messages and Codes

Engine Model Mismatch

3-98
Printer Engine model does not match. The following troubleshooting
procedure applies to this error.
Applicable Chain Link
Chain Link
Mismatch)
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
MCU Board, PL9.2.13
Troubleshooting Procedure Table
Step Actions and Questions
1. Turn the printer power Off and back
1
On.
2. Does the error still occur?
016-611: Print Engine Model Mismatch (IOT Model
Wiring and Plug/Jack Map References
Phaser 6180MFP Multifunction Printer Service Manual
Yes No
Replace the Complete.
MCU Board
(page 8-88).