Phaser 6180MFP Multifunction Printer Service Manual
Troubleshooting Procedure Table (continued)
Step
Actions and Questions
Check the Humidity Harness for
4
continuity.
1. Disconnect P/J26 from the MCU
Board.
2. Disconnect P/J261 from the
Humidity/Temperature Sensor.
3. Check continuity between P/J26 <=>
P/J261.
Check the Humidity/Temperature
5
Sensor signal.
1. Disconnect P/J26 from the MCU
Board.
2. Is there +5 V across ground <=>
J26-4 pin on the MCU Board?
Error Messages and Codes
Yes
No
Go to step 5.
Replace the
Humidity
Harness.
Replace the
Replace the
Humidity/
MCU Board
Temperature
(page 8-88).
Sensor
(page 8-87).
3-145