Xerox Phaser 6180MFP Service Manual page 126

Theory of Operation
2-44
Image Processor Board
The Image Processor (I/P) Board is connected to the MCU Board, which
controls the printer, including Diagnostic, Interface, and Image
Processing.
The I/P Board is one of the major elements of the Phaser 6180MFP.
The primary function of the I/P Board is to receive host data through one
of the following available ports (Parallel, USB, or Ethernet). The received
host data is buffered, stored, and sent to the print engine in a rasterized
format.
1. Standard Memory (384 MB on-board RAM)
2. Optional Memory DIMM (should be swapped)
3. Multi-Protocol Network Card Connection
4. NVRAM
5. Ethernet Connection
6. PC Interface Connection (Parallel)
7. USB Connection
5
6
7
When installing a new I/P Board in the printer, you must transfer the
following parts from the old board to the new board:
Memory DIMM (if installed)
NVRAM
Multi-Protocol Network Card (if installed)
4
s6180mfp-153
3 2
Phaser 6180MFP Multifunction Printer Service Manual
1