Hvps (Pl5.2.15) - Xerox Phaser 6180MFP Service Manual

Service Parts Disassembly

HVPS (PL5.2.15)

8-64
1. Open the Front Cover.
2. Remove the Fuser (page 8-12).
3. Remove the Rear Cover (page 8-18).
4. Remove the Bottom Cover (page 8-19).
5. Remove the Right Pole Inner Cover (page 8-21).
6. Remove the Right Pole Cover (page 8-22).
7. Remove the Right Cover (page 8-23).
8. Remove the Left Pole Inner Cover (page 8-24).
9. Remove the Left Pole Cover (page 8-25).
10. Remove Left Cover (page 8-26).
11. Remove the Top Cover (page 8-27).
12. Remove the Controller Shield Box Assembly (AIO PRT Box Assembly)
(page 8-92).
13. Remove the Fax Shield Box Assembly (page 8-96).
Note
When performing the following step, it is not necessary to remove the
connector and Fan wiring harness.
14. Remove the Main Fan (page 8-84).
Phaser 6180MFP Multifunction Printer Service Manual