Enabling/Disabling Automatic Color Registration; Adjusting Color Registration - Xerox Phaser 6180MFP Service Manual

Enabling/Disabling Automatic Color Registration

Adjusting Color Registration

Phaser 6180MFP Multifunction Printer Service Manual
This procedure provides instructions for how to enable or disable the
Automatic Color Registration function after a new Print Cartridge is installed.
If the function is set to On, the printer will calibrate the color alignment
every time it detects a new Print Cartridge.
If the function is set to Off, calibration will not occur. This allows users to
save toner.
To enable or disable the Automatic Color Registration:
1. From the Control Panel, press the System button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find Maintenance. Press
the OK button.
4. Press the Up Arrow or Down Arrow button find
the OK button.
5. Select On/ Off and press the OK button to turn the Auto Registration On/
Off.
Color Registration can be automatically or manually adjusted.
Determining the Values
From the lines to the right of the Y (yellow), M (magenta), and C (cyan)
pattern, find the values of the straightest lines.
When "0" is the value nearest the straightest line, you do not need to adjust
the color registration. When the value is not "0," refer to "Manual Adjustment"
on page 6-4.
Auto Adjustment
1. From the Control Panel, press the System button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find Maintenance. Press
the OK button.
4. Press the Up Arrow or Down Arrow button to find
Press the OK button.
5. Press the Up Arrow or Down Arrow button to find
the OK button.
6. Select Yes and press the OK button to start the Auto Adjustment
procedure.
7. The printer starts the auto Color Registration process.
8. When the auto Color Registration is completed, the
displayed.
9. Print the Color Registration Chart (page 6-2) and verify the adjustments.
Adjustments and Calibrations
Admin Menu. Press
Auto Regi Adjust. Press
Admin Menu. Press
Adjust ColorRegi.
Auto Correct. Press
Ready menu is
6-3