Xerox Phaser 6180MFP Service Manual page 479

Phaser 6180MFP Multifunction Printer Service Manual
Tray 1 (MPT) Feed Solenoid
1. Enter the Service Diagnostic menu (page 4-5).
2. Remove Tray 2.
3. Perform the Tray 2 Motor (FULL2) test:
Motor Test
4. While the Tray 2 Motor is running, press the Up Arrow button to find
Tray 1 (MPT) Feed
(MPT) Feed Solenoid test.
Note
The Tray 1 (MPT) Feed Roller rotates when the Tray 2 Motor (FULL2) and
the Tray 1 (MPT) Feed Solenoid tests are executed.
5. Verify that the Tray 2 Motor is working and the Tray 1 Feed Roller is
rotating.
6. Press the Stop button to stop the Tray 1 Feed Solenoid test.
7. Press the Down Arrow button to find
8. Press the Stop button to stop the Tray 2 Motor test.
> Tray 2 Motor (FULL2).
Solenoid. Press the OK button to run the Tray 1
Tray 1 (MPT) Feed Roller
General Troubleshooting
Printer Diag > Engine Diag
Tray 2 Motor (FULL2).
>
s6180mfp-187
4-67