Xerox Phaser 6180MFP Service Manual page 488

General Troubleshooting
4-76
Exit Clutch
1. Enter the Service Diagnostic menu (page 4-5).
2. Run the Exit Clutch test:
Clutch.
3. Verify that the Exit Roller is not rotating.
4. Press the Stop button to stop the test.
Combination Test
1. Enter the Service Diagnostic menu (page 4-5).
2. Perform the Main Motor (FULL2) test:
Motor Test
3. While the Main Motor is running, press the Up Arrow button to find
Clutch. Press the OK button to run the Exit Clutch test.
Note
The Exit Roller rotates when the Main Motor (FULL2) and the Exit Clutch
tests are executed.
4. Verify that the Main Motor is working and the Exit Roller is rotating.
5. Press the Stop button to stop the Exit Clutch test.
6. Press the Down Arrow button to find
7. Press the Stop button to stop the Main Motor test.
Printer Diag
> Main Motor (FULL2).
Exit Roll
Phaser 6180MFP Multifunction Printer Service Manual
> Engine Diag > Motor Test
Printer Diag > Engine Diag
Main Motor (FULL2).
> Exit
>
Exit
s6180mfp-195