Registration Clutch (PL3.1.19)
Phaser 6180MFP Multifunction Printer Service Manual
1.
Open the Front Cover.
2.
Remove the Fuser (page 8-12).
3.
Remove the Rear Cover (page 8-18).
4.
Remove the Bottom Cover (page 8-19).
5.
Remove the Right Pole Inner Cover (page 8-21).
6.
Remove the Right Pole Cover (page 8-22).
7.
Remove the Right Cover (page 8-23).
8.
Remove the Drive Assembly (page 8-78).
9.
Disconnect connector P/J233.
10.
Release the Gray Registration Clutch wiring harness from the clamp and
hook on the printer frame, and the clamp of the Feeder (PL3.2.1).
11.
Remove the E-ring securing the Registration Clutch to the Feeder.
12.
Remove the Registration Clutch from the Feeder.
Replacement Note
Replacement Note
Be sure to match the color of the Clutch Harness and the color of the
Clutch positioning rib. The Registration Clutch Harness is Gray.
Service Parts Disassembly
P/J233
Grey
s6180mfp-269
Grey
8-45