Service Parts Disassembly
Tray 2 Size Switch Assembly (PL7.1.18)
8-74
1.
Open the Front Cover.
2.
Remove the Fuser.
3.
Remove the Rear Cover (page 8-18).
4.
Remove the Bottom Cover (page 8-19).
5.
Remove the Right Pole Inner Cover (page 8-21).
6.
Remove the Right Pole Cover (page 8-22).
7.
Remove the Right Cover (page 8-23).
8.
Disconnect the Size Switch connector P/J231.
9.
Remove 1 screw (10 mm) securing the Size Switch to the printer.
10.
Release the 2 notches of the Size Switch and the notch located on the
bottom from the holes of the printer and remove the Size Switch.
P/J231
Phaser 6180MFP Multifunction Printer Service Manual
s6180mfp-305