Toner Remaining Amount; Maintenance Function - Xerox Phaser 6180MFP Service Manual

Toner Remaining Amount

Maintenance Function

Phaser 6180MFP Multifunction Printer Service Manual
Print Cartridge Control Panel Display
Print Cartridge
Xerox
Xerox (refill
Print
Cartridge)
Other OEM
(non-Xerox
printer
manufacturer)
Non-Xerox
Print Cartridge
Manufacturer
The CentreWare Internet Services (IS) and PrintingScout (SimpleMonitor)
allow the printer to display toner remaining amount.
Firmware Update
The Image Processor Board and Multi-Protocol Network Card firmware can
be updated by customers and service technicians using Windows PC or
Macintosh with dedicated utilities. Firmware updates are available at
www.xerox.com/office/6180MFPsupport.
Detailed procedures are available in the "Firmware Update" on page A-3.
Note
Boot Code can be updated via USB or Parallel port only.
Updated Firmware
Image Processor Board
Multi-Protocol Network Card
MCU Board*
* MCU Board cannot be updated when ROM starts to be used for MCU Board.
Control Panel Display
Life Warning
Normal Status
Error
Xerox (TM) Replace
Print Cartridge Soon
Xerox (TM) Replace
Print Cartridge Soon
Non-Xerox Print
Cartridge
Non-Xerox Print No Life
Cartridge Tracking
Via USB/IEEE1284
Available
Available
Available
General Information
Functionality
End of
Life Error
Replace Prints with full
Print functionality.
Cartridge
Empty Prints with full
functionality up to
40% of the Print
Cartridge life.
Printer displays error
and will not print.
Replace Prints with full
Print functionality.
Cartridge
Windows
Via Network (port 9100)
Available
Available
Available
1-39