Xerox Phaser 6180MFP Service Manual page 354

Error Messages and Codes
3-166
Troubleshooting Procedure Table (continued)
Step Actions and Questions
1. Check the network connection.
5
Reseat the network connector.
2. Does the error still occur?
1. Check the MPC Card for correct
6
installation. Reseat the MPC Card
(page 8-95).
2. Does the error still occur when
connecting to the server?
7 1. Check the network setting:
Admin Menu >
2. Is the printer network setting
correct?
8 1. Check the Image Processor Board
for correct installation. Reseat the
Image Processor Board
(page 8-90).
2. Does the error still occur when
connecting to the server?
Yes
Go to step 6.
If an MPC Card
is not installed,
go to step 7.
Go to step 7.
System > Go to step 8.
Network Settings.
Replace the
Image
Processor Board
(page 8-90).
Phaser 6180MFP Multifunction Printer Service Manual
No
Complete.
Complete.
Change the
Network Setting
information.
Complete.