Electrical Specifications - Xerox Phaser 6180MFP Service Manual

Electrical Specifications

Phaser 6180MFP Multifunction Printer Service Manual
Characteristic
Power Supply Voltage/Frequency
Line Voltages
Frequency Range
Current Capacity
Power Consumption
Sleep Mode
Deep Sleep Mode
(ENERGY STAR)
Standby (Fuser On)
Continuous Color or
Monochrome Printing
Average
In-rush Current
Maximum at 1st 2.5 msec
Within 10 msec
Leakage Current
Battery
Specifications
110-127 VAC ± 10%
220-240 VAC ± 10%
50/60 Hz ± 3 Hz
110 V: 9.0A
220 V: 4.5A
AC 110 V AC 220 V
35 W or less 35 W or less
17 W or less 17 W or less
90 W or less 90 W or less
500 W or less 500 W or less
50 Amp (Cold start)
135 Amp (Hot start)
80 Amp (110 V/ 220 V/ 240 V)
85 Amp (100 V)
Power Current
100 V M/C (1kVAC) < 3.5 mA (UL)
200 V M/C (1.5kVAC) < 3.5 mA (IEC)
Equipped with a lithium primary battery to maintain
contents of the system data and management
information for image information stored for
facsimile.
Data and information are guaranteed for more than
5 years of accumulated power Off time under the
condition where ambient temperature is 22° C.
The battery is recyclable and does not cause fire or
smoke.
General Information
1-23