Pdl Error - Xerox Phaser 6180MFP Service Manual

Error Messages and Codes

PDL Error

3-100
PDL Error has occurred. The following troubleshooting procedure applies to
this error.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.20
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the print job.
1. Print a small print job (example as a
Windows test print).
2. Does the error still occur?
2 1. Reseat the Image Processor Board
(page 8-90).
2. Does the error still occur?
016-720: PDL Error
Wiring and Plug/Jack Map References
Phaser 6180MFP Multifunction Printer Service Manual
Yes No
Go to step 2. Complete.
Replace the Complete.
Image
Processor Board
(page 8-90).