Error Message And Chain Link Code Summary - Xerox Phaser 6180MFP Service Manual

Error Message and Chain Link Code Summary

Phaser 6180MFP Multifunction Printer Service Manual
Chain Link for Scanner Controller (continued)
Chain Fail Group
133 Service Fail
034 Job Fail
134 Service Fail
035 Job Fail
062 Sub System Fail
102 System Fail
123 System Fail
The Error Message Summary table lists possible errors, along with the
corresponding code, and page reference for the corrective procedure.
The Control Panel Message column shows the message as it appears on
the printer's display when the error codes during normal operation.
The Chain Link column lists codes listed on the printer Error History
Report and the Control Panel.
The Go to Page column references the procedure related to the error.
Use this table to identify the proper procedure to correct the reported error.
Error Message and Chain Link Code Display
Chain Link
Code
Jam Errors (page 3-19)
N/A Jam at Tray 2 (Illegal Settings)
005-110 Jam at Scanner (Pickup Jam)
005-121 Jam at Scanner (ADF Jam)
071-100 Jam at Tray 2 (IOT Feeder 1 Jam)
N/A Jam at Tray 3 (Illegal Settings)
075-100 Jam at Tray 1 (MPT) (IOT MPT Jam)
077-900 Jam at Exit (IOT Exit Jam)
077-901 Jam at Registration Roll
(IOT Remain Registration Jam)
077-903 Jam at Tray 2 (IOT Feed Jam)
077-907 Jam at Duplexer (IOT Remain Duplex Jam)
Consumable/Routine Maintenance Errors (page 3-46)
010-317 Insert Fuser (IOT Fuser Detached)
010-351 Fuser Error (IOT Fuser Life Over)
Link Definition
210~ Controller (Fax)
500~, 700~ Fax Card (Main)
210~ Fax Card (Main)
700~ Fax Module
310~, 700~ Scanner
310~ Controller (UI, Panel)
310~ Panel
Control Panel Message
Error Messages and Codes
Go to Page
page 3-19
page 3-22
page 3-22
page 3-24
page 3-26
page 3-30
page 3-36
page 3-36
page 3-34
page 3-42
page 3-46
page 3-48
3-7