Ready Transfer Unit Life - Xerox Phaser 6180MFP Service Manual

Error Messages and Codes

Ready Transfer Unit Life

3-68
The Transfer Unit is near or has reached its end of life. The following
troubleshooting procedure applies to this error.
Applicable Chain Link
Chain Link
Initial Action
Check the Transfer Unit life using CentreWare IS.
Cycle printer power.
If problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Transfer Unit, PL4.1.1
MCU Board, PL9.2.13
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the Transfer Unit life using
1
CentreWare IS.
2. Does the Level show 0%?
Does the error still occur when the printer is
2
turned On?
094-422: Ready Transfer Life (IOT DTB Life Pre Warning)
Wiring and Plug/Jack Map Reference
"Map 1 - Electrical and Drive" on
page 10-10
"Map 4 - LVPS and MCU Board" on
page 10-13
"Xerographic" on page 10-34
Phaser 6180MFP Multifunction Printer Service Manual
Yes No
Replace the Go to step 2.
Transfer Unit
(page 8-9).
Replace the Complete.
MCU Board
(page 8-88).