Xerox Phaser 6180MFP Service Manual page 267

Phaser 6180MFP Multifunction Printer Service Manual
Troubleshooting Procedure Table (continued)
Step Actions and Questions
Check the C2 Chute Harness for
4
continuity.
1. Disconnect P/J421 from the
Optional Feeder Board.
2. Disconnect P/J4211 from the
Optional Size Switch Assembly.
3. Check continuity between P/J421
<=> P/J4211.
1. Replace the Tray 3 Size Switch
5
(page 8-129).
2. Does the error still occur?
Error Messages and Codes
Yes No
Go to step 5. Replace the
550-Sheet
Feeder
(page 8-116).
Replace the Complete.
MCU Board
(page 8-88).
3-79