Control Panel Language Set Unsupported - Xerox Phaser 6180MFP Service Manual

Control Panel Language Set Unsupported

Phaser 6180MFP Multifunction Printer Service Manual
The Control Panel does not support the language. The following
troubleshooting procedure applies to this error.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
MCU Board, PL9.2.13
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Turn the printer power Off and back
On.
2. Does the error still occur?
016-610: Panel Language Set unsupported
Wiring and Plug/Jack Map References
Error Messages and Codes
Yes No
Replace the Complete.
MCU Board
(page 8-88).
3-97