Xerox Phaser 6180MFP Service Manual page 239

Phaser 6180MFP Multifunction Printer Service Manual
Troubleshooting Procedure (continued)
Step Actions and Questions
Check the Fuser Harness for continuity.
4
1. Disconnect P/J17 from the MCU Board.
2. Disconnect P/J171 from the Fuser Unit.
3. Disconnect P/J47 from the LVPS.
4. Check continuity between P/J17 and P/
J47 <=> P/J171.
Check the LVPS Harness for continuity.
5
1. Disconnect P/J501 from the LVPS.
2. Disconnect P/J14 from the MCU Board.
3. Check continuity between P/J501 <=> P/
J14.
6 1. Replace the Fuser (page 8-12).
2. Does the error still occur?
7 1. Replace the LVPS (page 8-83).
2. Does the error still occur when the printer
is turned On?
Error Messages and Codes
Yes No
Go to step 5. Replace the
Fuser
Harness.
Go to step 6. Replace the
LVPS
Harness.
Go to step 7. Complete.
Replace the Complete.
MCU Board
(page 8-88).
3-51