Options
Duplex Unit (PL12.1.1)
Phaser 6180MFP Multifunction Printer Service Manual
1.
Open the Front Cover.
2.
Remove the Transfer Unit (page 8-9).
3.
Lift the Duplex Unit lever to release the lock.
4.
Release the notches on the bottom of the Duplex Unit out from the holes
of the Front Cover and remove the Duplex Unit.
Replacement Note
Replacement Note
Be sure to remove the plastic Connector Cover from the Duplex Unit
connector location (if installed). The cover is only installed if the
printer never had a Duplex Unit installed.
Service Parts Disassembly
s6180mfp-126
8-115