Resetting the Fuser
Phaser 6180MFP Multifunction Printer Service Manual
Fuser reset is required when a new Fuser is installed into the printer. This
function sets the life counter to "0."
1.
From the Control Panel, press the System button.
2.
Press the Up Arrow or Down Arrow button to find
the OK button.
3.
Press the Up Arrow or Down Arrow button to find Maintenance. Press
the OK button.
4.
Press the Up Arrow or Down Arrow button to find
the OK button.
5. Are You Sure?
message is displayed. Select
button to start the process.
6.
The
Maintenance - Reset Fuser
completed.
Adjustments and Calibrations
Admin
Reset
Yes
and press the OK
menu is displayed when the process is
Menu. Press
Fuser. Press
6-5