Fax Communication Error - Xerox Phaser 6180MFP Service Manual

Error Messages and Codes

Fax Communication Error

3-196
Fax communication has occurred. The following troubleshooting procedure
applies to these errors.
Applicable Chain Link
Chain Link
Exchange Error)
Chain Link
Memory Full)
Chain Link
Chain Link
Do)
Chain Link
ON)
Chain Link
Change Error)
Chain Link
Receive I/F Error)
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Scanner Controller Board, PL9.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Turn the printer power Off and back
On.
2. Does the error still occur?
1. Check the Country setting:
2
Admin Menu
Country.
2. Is the Country setting correct?
033-512: Fax Communication Error (Modem Parameter
033-513: Fax Communication Error (Stop Communication in
033-751: Fax Communication Error (Over Run)
033-764: Fax Communication Error (Draw Data Create Not
035-730: Fax Communication Error (RS Request CS NOT
035-779: Fax Communication Error (FAX FWD Document
133-231: Fax Communication Error (T_FAXCOM Data
Wiring and Plug/Jack Map References
System
> Fax Settings >
Phaser 6180MFP Multifunction Printer Service Manual
Yes No
Go to step 2. Complete.
> Go to step 3. Change the
Country Setting
to the correct
country.