Xerox Phaser 6180MFP Service Manual page 584

Print-Quality Troubleshooting
5-58
Troubleshooting Procedure Table (continued)
Step Actions and Questions
1. Replace the ADF Scanner Assembly
5
(page 8-103).
2. Does the document feed correctly?
1. Check the paper condition.
6
2. Is the paper dry, recommended
type, and loaded in the correct
position?
7 1. Check the Front Cover Latch. Open
and close the Front Cover.
2. Does the error still occur?
1. Check the Transfer Unit for correct
8
installation. Reseat the Transfer Unit
(page 8-9).
2. Does the error still occur?
9 1. Check the Fuser for correct
installation. Reseat the Fuser
(page 8-12).
2. Does the error still occur?
1. Check the skewed tray.
10
2. Did the damaged paper feed from
Tray 1 (MPT)?
1. Check the paper for correct
11
placement. Reseat the paper in Tray
1 (MPT).
2. Does the error still occur?
12 1. Check the Tray 1 (MPT) Side Guides.
Reseat the Side Guides.
2. Does the error still occur?
1. Check the paper path.
13
2. Are there any debris on the paper
path?
14 1. Replace the Tray 1 (MPT) Feed
Roller (page 8-13).
2. Does the error still occur?
15 Did the damaged paper feed from the
Duplex Unit?
1. Check the Duplex Unit for correct
16
installation. Reseat the Duplex Unit
(page 8-115).
2. Does the error still occur?
17 1. Check the paper path.
2. Are there any debris on the paper
path?
Yes
Complete.
Go to step 7.
Go to step 8.
Go to step 9.
Go to step 10.
Go to step 11.
Go to step 12.
Go to step 13.
Remove the
debris.
Replace the Tray
1 (MPT) Retard
Holder
(page 8-38).
Go to step 16.
Go to step 17.
Remove the
debris.
Phaser 6180MFP Multifunction Printer Service Manual
No
Go to step 6.
Replace the
paper.
Complete.
Complete.
Complete.
Go to step 15.
Complete.
Complete.
Go to step 14.
Complete.
Go to step 18.
Complete.
Replace the
Duplex Unit
(page 8-103).