Xerox Phaser 6180MFP Service Manual page 839

Phaser 6180MFP Multifunction Printer Service Manual
Signal Line Name
CLK
DATA
STS
VC
VD
FUSER EXIT SENSED (L)
+3.3 VDC
FUSER ON
RELAY TEST LOW
RELAY TEST HIGH
Plug/Jack and Wiring Diagrams
Description
Controls signal of the EEPROM Fuser.
Provides Heat Roll surface temperature data measured
by the Humidity/Temperature Sensor for detecting high
temperature (Analog value).
Provides temperature data measured by the Humidity/
Temperature Sensor for controlling the temperature
(Analog value).
Detects signal of the Fuser Exit by the Photo Sensor
(Exit Sensor).
Displays lighting signal of the Fuser Lamp.
Tests signal of the LVPS (used in production process
only)
10-41