Xerox Phaser 6180MFP Service Manual page 514

General Troubleshooting
4-102
Troubleshooting Procedure Table (continued)
Step Actions and Questions
1. Check the Black Print Cartridge for
5
correct installation. Reseat the Black
Print Cartridge (page 8-11).
2. Perform the Main Motor test (page 4-54):
Service Mode
Diag > Motor Test
3. Does the noise come from the printer?
6 1. Remove the Transfer Unit (page 8-9).
2. Perform the Main Motor test (page 4-54):
Service Mode
Diag > Motor Test
3. Does the noise come from the printer?
7 1. Check the Transfer Unit for correct
installation. Reseat the Transfer Unit
(page 8-9).
2. Perform the Main Motor test (page 4-54):
Service Mode
Diag > Motor Test
3. Does the noise come from the printer?
8 1. Check the Main Drive Assembly for
correct installation. Reseat the Main
Drive Assembly (page 8-75).
2. Perform the Main Motor test (page 4-54):
Service Mode
Diag > Motor Test
Remove the following parts, one after
another when performing the Main Motor
test.
Fuser (page 8-12)
Black Print Cartridge (page 8-11)
Transfer Unit (page 8-9)
Main Drive Assembly (page 8-75)
3. Does the noise come from the printer?
9 1. Perform the Sub Motor test (page 4-55):
Service Mode
Diag > Motor Test
2. Does the noise come from the printer?
1. Remove the Print Cartridges (page 8-11).
10
2. Perform the Sub Motor test (page 4-55):
Service Mode
Diag > Motor Test
3. Does the noise come from the printer?
> Printer Diag > Engine
> Main Motor.
> Printer Diag > Engine
> Main Motor.
> Printer Diag > Engine
> Main Motor.
> Printer Diag > Engine
> Main Motor.
> Printer Diag > Engine
> Sub Motor.
> Printer Diag > Engine
> Sub Motor.
Phaser 6180MFP Multifunction Printer Service Manual
Yes No
Go to step 6. Complete.
Go to step 7. Complete.
Go to step 8. Complete.
Go to step 9. Complete.
Go to step 10. Go to step 13.
Go to step 11. Complete.