Macintosh Troubleshooting (Mac Os 10.2 And Higher) - Xerox Phaser 6180MFP Service Manual

Macintosh Troubleshooting (Mac OS 10.2 and Higher)

Phaser 6180MFP Multifunction Printer Service Manual
The following procedures eliminates cabling, communication, and connection
problems. Once you complete these steps, print a test page from your
software application.
Note
If the job prints, no further system troubleshooting is necessary. If there
are print-quality problems, refer to the User Guide at www.xerox.com/
office/6180MFPsupport.
Macintosh Troubleshooting OS 10.2 Step-by-Step
Perform these steps only for Mac OS 10.2 and higher.
1. Open the
2. Enter the printer's IP address.
3. Click Ping. If you do not get a response, verify that your TCP/IP settings
are correct for your printer and computer.
Note
See also: www.xerox.com/office/6180MFPsupport
Network Utility and click the Ping tab.
General Troubleshooting
4-111