+24 Vdc Interlock Switch - Xerox Phaser 6180MFP Service Manual

General Troubleshooting

+24 VDC Interlock Switch

4-86
Troubleshooting Reference Table
Applicable Parts
Interlock Harness, PL9.2.3
LVPS, PL9.2.4
LVPS Harness, PL10.1.3
Troubleshooting Procedure Table
Step Actions and Questions
1 Check the Interlock Harness for continuity.
1. Disconnect P/J44.
2. Check continuity between P/J44-1 <=> P/
J44-3.
3. Is there voltage present when the
Interlock is activated?
2 1. Disconnect the wiring harness
connectors P/J501 and P/J14.
2. Check continuity between P/J44-1 <=> P/
J44-3.
3. Is there +24 V present?
Wiring and Plug/Jack Map References
"Map 4 - LVPS and MCU Board" on
page 10-13
"DC Power Supply" on page 10-24
Yes
Go to step 2.
Go to "LVPS"
on page 4-84.
Phaser 6180MFP Multifunction Printer Service Manual
No
Replace the
Interlock
Switch
(page 8-82).
Replace the
LVPS
Harness.