Xerox Phaser 6180MFP Service Manual page 132

Theory of Operation
2-50
Tray 3 Bottom Plate
a. When the tray is inserted into the Sheet Feeder, the Actuator is
pushed toward the front by the Left Guide, which pushes the Stopper.
b. The Stopper unlocks the Bottom Lock Oneway Gear.
c. When the tray is pushed until it stops, the Bottom Lock Lever is
pressed down by the Support Nudger in the Feeder.
d. The Bottom Lock Lever actuates the Bottom Lock Lever Gear, which
pushes the Bottom Rack Lock toward the rear.
e. The gear on the Bottom Rack Lock is disengaged from the Bottom
Lock Oneway Gear, which allows the Bottom Plate to raise up by the
Bottom Up Springs.
Bottom Rack Lock
Rear of Tray
Bottom Lock Lever
Bottom Rack Lock
e
Left Guide
Actuator
Lock Part
(Tray Housing)
Bottom Plate
Bottom Lock Oneway Gear
Support Nudger
c
Bottom Lock
Lever Gear
d
Bottom Lock Oneway Gear
Stopper
a
Stopper
b
Phaser 6180MFP Multifunction Printer Service Manual
Bottom Up Spring
Front of Tray
s6180mfp-059