Xerox Phaser 6180MFP Service Manual page 581

Phaser 6180MFP Multifunction Printer Service Manual
Troubleshooting Procedure Table (continued)
Step Action and Questions
1. Check the document.
5
2. Does the document meet the ADF
specifications?
Does the image quality improve?
6
1. Check the document setting.
7
2. Is the document placed on the
document glass correctly?
8 1. Check the Feed Roller and the
Separator Pad.
2. Are there damages or debris on the
Feed Roller and the Separator Pad?
1. Check the paper condition.
9
2. Is the paper dry, recommended
type, and loaded in the correct
position?
10 1. Check the Front Cover Latch. Open
and close the Front Cover.
2. Does the error still occur?
11 1. Check the Transfer Unit for correct
installation. Reseat the Transfer Unit
(page 8-9).
2. Does the error still occur?
12 1. Check the Print Cartridge (C/M/Y/K)
for correct installation. Reseat the
Print Cartridge (page 8-11).
2. Does the error still occur?
13 1. Check the skewed tray.
2. Is the skewed paper fed from Tray 1
(MPT)?
1. Check the paper for correct
14
placement. Reseat the paper.
2. Does the error still occur?
15 1. Check the Tray 1 (MPT) Side Guides.
Reset the Paper Guides.
2. Does the error still occur?
16 1. Check the paper path.
2. Are there any debris on the paper
path?
Print-Quality Troubleshooting
Yes No
Check the paper Use the
guide setting to document glass
ensure it is mode or change
adjusted the paper type.
correctly. Reset
the side guide of
the ADF.
Go to step 6.
Complete. Go to step 7.
Replace the ADF Reseat the
Scanner document.
Assembly
(page 8-103).
Remove the Replace the
debris or replace ADF Scanner
the ADF Feed Assembly
Roller & Pad (page 8-103).
(page 8-110).
Go to step 10. Replace the
paper.
Go to step 11. Complete.
Go to step 12. Complete.
Go to step 13. Complete.
Go to step 14. Go to step 18.
Go to step 15. Complete.
Go to step 16. Complete.
Remove the Go to step 17.
debris.
5-55