Xerox Phaser 6180MFP Service Manual page 483

Phaser 6180MFP Multifunction Printer Service Manual
Duplex Clutch
Caution
When performing this procedure, remove and cover the Print Cartridges
to avoid exposure to light if the Front Door will be opened for prolonged
periods.
1. Enter the Service Diagnostic menu (page 4-5).
2. Open the Front Cover.
3. Remove the Transfer Unit (page 8-9).
4. Remove the Print Cartridges (page 8-11).
5. Use a paper clip to secure the Interlock Switch.
6. Perform the Duplex Motor (HIGH) test:
Motor Test
7. While the Duplex Motor is running, press the Up Arrow button to find
Duplex
Note
The Duplex Gear rotates when the Duplex Motor (HIGH) and the Duplex
Clutch tests are executed.
8. Verify that the Duplex Motor is working and the gear is rotating.
9. Press the Stop button to stop the Duplex Clutch test.
10. Press the Down Arrow button to display
11. Press the Stop button to stop the Duplex Motor test.
> Duplex Motor (HIGH).
Clutch. Press the OK button to run the Duplex Clutch test.
General Troubleshooting
Printer Diag > Engine Diag
s6180mfp-191
Duplex Motor (HIGH).
>
4-71