Xerox Phaser 6180MFP Service Manual page 533

Phaser 6180MFP Multifunction Printer Service Manual
2. Print is too light.
Light or Undertone Print
a. The toner may be too low. Check the amount of toner and change the
Print Cartridges if necessary.
b. In the printer Printing Preferences menu:
that the Draft Mode
c. If you are printing on an uneven print surface, change the paper type
settings in the Tray Settings menu.
d. Verify that the correct type of paper is used.
e. The Print Cartridge may need to be replaced. Replace the Print
Cartridge.
3. Toner smears or print comes off page.
Smudges or Smears
a. If you are printing on a thick or an uneven media, change the Media
Type settings in the Tray Settings menu to a heavier type.
b. Verify that the paper is within the printer specifications (refer to
"Media and Tray Specifications" on page 1-34).
Print-Quality Troubleshooting
Advanced
box is not selected.
> Details, verify
5-7