Parallel Port Error - Xerox Phaser 6180MFP Service Manual

Parallel Port Error

Phaser 6180MFP Multifunction Printer Service Manual
Parallel Port error has occurred. The following troubleshooting procedure
applies to this error.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.20
Parallel Cable
Troubleshooting Procedure Table
Step Actions and Questions
1. Check the Parallel cable connection.
1
2. Is the cable securely connected?
Does the error still occur?
2
3 Does the error still occur?
116-367: Parallel Port Error (IEEE 1284 Data Error)
Wiring and Plug/Jack Map References
Error Messages and Codes
Yes No
Go to step 2. Reconnect the
cable.
Go to step 2.
Replace the Complete.
Parallel Cable.
Go to step 3.
Replace the Complete.
Image
Processor Board
(page 8-90).
3-153