Phaser 6180MFP Multifunction Printer Service Manual
Tray 2 No Paper
1.
Enter the Service Diagnostic menu (page 4-5).
2.
Perform the Tray 2 No Paper test:
Test
>
Tray 2 No Paper
3.
Remove Tray 2.
4.
Move the Actuator up and down while checking the information on the
Control Panel display. The Low and High values change from 0 up to 99.
5.
Press the Stop button to stop the Tray 2 No Paper test.
Printer Diag
> OK.
Actuator
Control Panel
General Troubleshooting
>
Engine Diag
>
Sensor
Tray 2 No Paper
L-0
Normal
Tray 2 No Paper
H-0
s6180mfp-170
4-51