Xerox Phaser 6180MFP Service Manual page 801

Phaser 6180MFP Multifunction Printer Service Manual
Print Engine Plug/Jack Designators (continued)
P/J Map Coordinates
25 4 H-158
26 4 I-159
27 4 I-159
31 4 I-159
40a 4 F-153
40b 4 F-153
44 4 F-152
47 4 F-152
48 4 E-152
48 3 H-144
50 3 J-142
52 3 H-141
53 3 I-144
56 3 I-143
60 3 J-143
61 3 J-143
62 3 J-143
63 3 J-143
64 3 I-142
65 3 J-142
101 3 F-138
101 4 I-158
111 3 F-138
121 2 G-123
141 3 I-136
Plug/Jack and Wiring Diagrams
Remarks
Connects the MCU Board and Right Side AIO
Harness.
Connects the MCU Board and Humidity/
Temperature Harness.
Connects the MCU Board and Right Side AIO
Harness.
Connects the MCU Board and CRUM Harness.
Connects the LVPS and AIO I/F Harness.
Connects the LVPS and AIO Power Controller
Harness.
Connects the LVPS and Interlock Switch.
Connects the LVPS and Fuser Harness.
Connects the LVPS and Inlet Harness.
Connects the Scanner Controller Board and
Controller Harness.
Connects the Scanner Controller Board and AIO
Power Controller Harness.
Connects the Scanner Controller Board and Speaker
Assembly.
Connects the Scanner Controller Board and A-OP
Controller Harness.
Connects the Scanner Controller Board and Fax
Board.
Connects the Scanner Controller Board and ADF
Scanner Assembly (Empty Sensor, PCB Sensor).
Connects the Scanner Controller Board and ADF
Scanner Assembly (ADF Open Sensor).
Connects the Scanner Controller Board and ADF
Scanner Assembly (ADF Motor).
Connects the Scanner Controller Board and ADF
Scanner Assembly (Scanner Motor).
Connects the Scanner Controller Board and ADF
Scanner Assembly (CCD Board).
Connects the Scanner Controller Board and the ADF
Scanner Assembly (CCD Board).
Connects the Image Processor Board and AIO I/F
Harness.
Not connected (Debug only).
Connects the Image Processor Board and AIO I/F
Harness.
Connects the Laser Unit and Laser Unit Harness.
Connects the LED and LVPS Harness.
10-3