Phaser 6180MFP Multifunction Printer Service Manual
Troubleshooting Procedure Table (continued)
Step
Actions and Questions
Check the Right Side Harness for
4
continuity.
1. Disconnect P/J23 from the MCU
Board.
2. Disconnect P/J231 from the Size
Switch Assembly.
3. Check continuity between P/J23 <=>
P/J231.
1. Replace the Tray 2 Size Switch
5
(page 8-74).
2. Does the error still occur when the
printer is turned On?
Error Messages and Codes
Yes
No
Go to step 5.
Replace the
Right Side
Harness.
Replace the
Complete.
MCU Board
(page 8-88).
3-77