IQ3 Horizontal Black Bands RAP
Periodic dark of blurry horizontal stripes in the printed image
Procedure
•
Switch Off the power.
•
Check the contacts on the Print Cartridge and the LVPS / HVPLS PWB for contamination
or damage.
•
Switch On the power and make a test print.
The defect is still present.
Y
N
Go to Call Closeout.
Replace the Print Cartridge, refer to WorkCentre® 3025 User Guide for detailed instructions on
how to replace the Print Cartridge.
Figure 1 Horizontal black bands
Xerox® WorkCentre® 3025 Multifunction Printer Service Manual
IQ4 Spots RAP
(Figure
1).
Random or periodic dark areas in the low density areas of a print, or voids in the dark areas of
a print
Initial Actions
Ensure that the Print Cartridge is firmly seated.
Procedure
Switch off the power.
Check the Transfer Roller for wear, damage and remaining life. The Transfer Roller is OK.
Y
Check the circuit for the Print Cartridge, refer to BSD 9.1.
Switch on the power and make a test print. The test print looks OK.
Y
If problem persists, replace the Fuser Module;
June 2014
3-5
(Figure
1).
N
Replace the Transfer Roller,
(REP
1.17),
N
Replace the Print Cartridge, refer to WorkCentre® 3025 User Guide for detailed instruc-
tions on how to replace the Print Cartridge.
Figure 1 Black spots
PL
5.1.
(REP
1.19),
PL
5.2.
Image Quality
IQ3, IQ4