Calibrations; Initializing Print Meter; Initializing Nvm (Nvram) - Xerox Phaser 6180MFP Service Manual

Adjustments and Calibrations

Calibrations

Initializing Print Meter

Initializing NVM (NVRAM)

6-6
This process initializes the Print Meter.
1. From the Control Panel, press the System button.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find Maintenance. Press
the OK button.
4. Press the Up Arrow or Down Arrow button to find
the OK button.
5. Are You Sure? message is displayed. Select
button to start the process.
6. Initializing message is displayed. The
menu is displayed when the process is completed.
This process initializes the settings stored in the NVRAM except for the
network settings. The NVRAM is a non-volatile memory that stores the printer
settings even after the power is turned Off. After executing this function and
restarting the printer, all the menu parameters are reset to their default values.
There are two options available: User Section and System Section.
User Section (User NVM) – Unique user information stored in NVM
which includes Address Book (e-mails, computer, FTP, and Fax).
System Section (System NVM) – System information stored in NVM
which includes default settings and some passwords for print, copy, scan,
and fax. Any information stored in the User NVM will not be cleared when
System NVM is reset.
1. Press the System button to access the printer Control Panel menu.
2. Press the Up Arrow or Down Arrow button to find
the OK button.
3. Press the Up Arrow or Down Arrow button to find Maintenance. Press
the OK button.
4. Press the Up Arrow or Down Arrow button to find
the OK button.
5. Select User Section
6. Are You Sure? message is displayed. Select
button to start the process.
7. Please wait message is displayed.
8. The Ready menu is displayed when the process is completed.
Maintenance - Init Print Meter
or System Section. Press the OK button.
Phaser 6180MFP Multifunction Printer Service Manual
Admin Menu. Press
Init Print Meter. Press
Yes and press the OK
Admin Menu. Press
Initialize NVM. Press
Yes and press the OK