Xerox Phaser 6180MFP Service Manual page 433

Phaser 6180MFP Multifunction Printer Service Manual
Printer Diag Test Table (continued)
Test Control Panel Display
Duplex Fan Duplex Fan
Ready
EXEC
NVM Settings <Press the Up or Down
button to move from one
item to another>
<Press the Cancel button
to move one level up the
menu>
<Press the Set button to
move to the execution
level>
Edit NVM Edit NVM
(Do not use)
Ad0000=00000000*
Please wait
<Press the Left or Right
button to move the
cursor>
<Press the Up or Down
button to change the
value at the cursor>
<Press the OK button to
save the value in Engine
NVM>
<Press the Exit button to
move one level up the
menu>
Save NVM to SaveNVM to ESS
ESS
SaveNVM to ESS OK?
Processing
Saved
Please wait
<Press the OK button to
save the value in the
Controller NVM>
<Press the Exit button to
move one level up the
menu>
General Troubleshooting
Test Description
Tests the Duplex Fan.
Edits, saves, loads, and prints NVRAM
information.
Displays the current NVRAM value.
Use this function to edit NVRAM
information.
Saves the NVRAM information of the
Engine in the Controller. NVRAM
addresses to be saved are as follows:
1000-10FF, Total: 256Byte
Note: Information saved in the
Controller NVM can be initialized using
Clear All NVM.
4-21