Error Messages and Codes
Range Check Error
3-110
An error occurred while writing to Flash memory. The following
troubleshooting procedure applies to this error.
Applicable Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Image Processor Board, PL9.1.20
Troubleshooting Procedure Table
Step
Actions and Questions
1
1. Check the printer firmware.
2. Does the firmware have the correct
version?
1. Check the Image Processor Board
2
for correct installation. Reseat the
Image Processor Board
(page 8-90).
2. Does the error still occur?
016-743: Range Check Error (Download Range Error)
Wiring and Plug/Jack Map References
Phaser 6180MFP Multifunction Printer Service Manual
Yes
No
Go to step 2.
Update the
firmware (refer
to "Firmware
Update" on
page A-3).
Replace the
Complete.
Image
Processor Board
(page 8-90).