Saving Nvm (Nvram); Loading Nvm (Nvram) - Xerox Phaser 6180MFP Service Manual

Multifunction printer
Hide thumbs Also See for Phaser 6180MFP:
Table of Contents

Advertisement

Saving NVM (NVRAM)

Loading NVM (NVRAM)

Phaser 6180MFP Multifunction Printer Service Manual
This process saves the settings stored in the NVRAM to the Image Processor
Board.
1.
Access the Service Diagnostics menu by pressing and holding the Up
and Down Arrow buttons simultaneously and turn the printer power On.
2.
The
Service Mode
is displayed. Select
button.
3.
Press the Up Arrow or Down Arrow button to find
the OK button.
4.
Press the Up Arrow or Down Arrow button to find
the OK button.
5.
Press the Up Arrow or Down Arrow button to find
Press the OK button.
6. SaveNVM to ESS - OK?
start the process.
7. Processing > Saved
8.
Press the Exit button three times to return to the
Press the Up Arrow or Down Arrow button to find
OK button.
9. Complete Exit
message is displayed. Press the OK button.
10. Exit?
message is displayed. Press the OK button.
This process loads the NVM settings stored in the Image Processor Board.
1.
Access the Service Diagnostics menu by pressing and holding the Up
and Down Arrow buttons simultaneously and turn the printer power On.
2.
The
Service Mode
is displayed. Select
button.
3.
Press the Up Arrow or Down Arrow button to find
the OK button.
4.
Press the Up Arrow or Down Arrow button to find
the OK button.
5.
Press the Up Arrow or Down Arrow button to find
Press the OK button.
6. LoadNVM from ESS - OK?
to start the process.
7. Processing > Loaded
8.
Press the Exit button.
9. Please wait...
message is displayed on the printer's Control Panel.
10. NVM Settings... - LoadNVM from ESS
11.
Press the Exit button two times to return to the
the Up Arrow or Down Arrow button to find
button.
12. Complete Exit
message is displayed. Press the OK button.
13. Exit?
message is displayed. Press the OK button.
14. Please wait...
-->
Ready
Panel.
Printer Diag
message is displayed. Press the OK button to
message is displayed.
Printer Diag
message is displayed. Press the OK button
message is displayed.
menu is displayed.
Exit
messages are displayed on the printer Control
Adjustments and Calibrations
and press the OK
Engine
Diag. Press
NVM
Settings. Press
Save NVM to
ESS.
Printer Diag
menu.
Exit
Mode. Press the
and press the OK
Engine
Diag. Press
NVM
Settings. Press
LoadNVM from
ESS.
Printer Diag
menu. Press
Mode. Press the OK
6-7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Phaser 6180mfp/nPhaser 6180mfp/d

Table of Contents