Xerox Phaser 6180MFP Service Manual page 718

Service Parts Disassembly
8-100
Replacement Note Replacement Note
DO NOT use the NVM ROM from the new Scanner Controller Board.
DO NOT apply pressure on the Scanner Controller Board when
removing the NVM ROM.
1. Make sure to move the NVM ROM from the old Scanner Controller Board
to the new Scanner Controller Board.
2. Carefully check the correct orientation of the NVM ROM when installing
the NVM ROM.
3. Install the NVM ROM that was removed from the old Scanner Controller
Board on the IC socket of the new Scanner Controller Board with its notch
aligned with the notch in the IC socket.
Old Scanner Controller Board New Scanner Controller Board
4. After reinstall all the components, turn On the printer.
5. Press the System button to access the
Up Arrow or Down Arrow to find
6. Press the Up Arrow or Down Arrow to find
OK button.
7. Press the Up Arrow or Down Arrow to find Country.... Press the OK
button.
Notch
Control Panel
Admin menu. Press the OK button.
Fax Settings.... Press the
Phaser 6180MFP Multifunction Printer Service Manual
s6180mfp-413
menu. Press the