General Troubleshooting
4-50
Tray 1 (MPT) No Paper
Note
Ensure to remove paper from the Tray 1 (MPT) prior performing the test.
1.
Enter the Service Diagnostic menu (page 4-5).
2.
Perform the MPT No Paper test:
Test
>
MPT No Paper
3.
Open Tray 1 (MPT).
4.
Move the Actuator back and forth while checking the information on the
Control Panel display. The Low and High values change from 0 up to 99.
Actuator
5.
Press the Stop button to stop the Tray 1 No Paper test.
Printer Diag
>
> OK.
Control Panel
MPT No Paper
MPT No Paper
Phaser 6180MFP Multifunction Printer Service Manual
Engine Diag
>
Sensor
L-0
Normal
H-0
s6180mfp-169