Motor Tests - Xerox Phaser 6180MFP Service Manual

General Troubleshooting

Motor Tests

4-54
Main Motor (FULL2/FULL1/HALF1/LOW)
Caution
The Main Motor is in the Main Drive. When performing this procedure,
remove and cover the Print Cartridges to avoid exposure to light.
Note
The rotational speed of the Main Motor is as follows:
LOW < HALF < FULL2 < FULL1
1. Enter the Service Diagnostic menu (page 4-5).
2. Open the Front Cover.
3. Remove the Transfer Unit (page 8-9).
4. Remove the Print Cartridges (page 8-11).
5. Use a paper clip to secure the Interlock Switch.
6. Perform the Main Motor (FULL2/FULL1/HALF/LOW) test:
Engine Diag
7. Verify that the Main Motor is running and the gear is rotating.
8. Press the Stop button to stop the Main Motor test.
9. Remove the paper clip from the Interlock Switch.
> Motor Test > Main Motor
Phaser 6180MFP Multifunction Printer Service Manual
Printer Diag
(FULL2/FULL1/HALF/LOW).
s6180mfp-173
>