Black Print - Xerox Phaser 6500 Service Manual

Black Print

Phaser 6500/WorkCentre 6505 Service Manual
Troubleshooting Procedure (continued)
Step Actions and Questions
24
Replace the Laser Unit. (page 8-86)
Is the image printed correctly?
The entire image is Black.
Initial Actions
• Check the media path.
• Ensure there are no debris on the transfer path.
• Print an Engine Test print (page 4-47).
Troubleshooting Reference Table
Applicable Parts
Laser Unit Kit, PL4.1.99
HVPS, PL4.1.19
Imaging Unit, PL4.1.21
IP Board, PL8.1.7
MCU Board, PL8.2.13
Troubleshooting Procedure
Step Actions and Questions
1 Print the Gradation ESS test print
(page 5-47): Test Print> Toner
Gradation ESS
Is the image printed correctly?
2 Print an Engine Test print
(page 4-47).
Is the image printed correctly?
3 Reseat the Imaging Unit.
Is the image printed correctly?
4 Reseat all MCU Board connectors.
Is the image printed correctly?
Xerox Internal Use Only
Print-Quality Troubleshooting
Yes No
Complete Replace the IP
Board
(page 8-120).
Example Print
Yes No
Go to step 2. Go to step 3.
Replace the IP Go to step 3.
Board
(page 8-120).
Complete Go to step 4.
Complete Go to step 5.
Black Print
5-13