Step 3: Install The License Client - Avaya Customer Interaction Express 1.0 User Manual

Step 3: Install the license client.

To install the license client, follow these steps.
1. The bootstrapper is launched. The Customer Interaction Express License Client dialog opens. If
you install the license client without a bootstrapper, you must accept the license agreement.
2. Click Next. The WebLM Parameter dialog opens.
3. Enter the following settings.
Settings
License Server
Port
4. Optional:
Settings
Master License Server
Port
5. Click Next. The Ready to Install the Program dialog opens.
6. Click Install. The installation takes about five seconds.
7. Click Finish. The installation is complete.
Comments
Enter the host name or TCP/IP number of the license server used
where the licenses for CIE are installed.
Indicates the port number of the Tomcat Web server running the local
license server (WebLM).
As a general rule, use the default setting port 8080.
Additional Master License Server (only for two server mode)
Comments
You can configure a master license server (WebLM) if you have one.
Enter the host name or TCP/IP number of the master license server.
Indicates the port number of the Tomcat Web server running the
master license server.
As a general rule, use the default setting port 8080.
Installing the client components
Edition: 1.1 03/08/2007 91